Packaging Sets
All-inklusive-Sets. The Correct Combination.
These complete dangerous goods packaging solutions feature outer-, inner- / intermediate packaging and PE foam interiors if needed. They are approved for shipment of dangerous goods by sea-, air-, rail- and road transport as 4G / 4GV packagings and tested according to the regulations for excepted quantities.
GBox Extra
- Dangerous goods packaging for small and sample shipments
- UN approved for all modes of transport, closed without tape
- UN approved for 4G/X and 4GV/X for liquids, solids and dangerous devices
- Outer dimensions 120 x 120 x 182 mm
- Dangerous goods packaging for the shipment of excepted quantities
- Outer dimensions 120 x 120 x 182 mm
- Max. size of inners: Diameter 14.7 mm, height 45 mm
The listed cartons are approved for shipment of dangerous goods by sea-, air-, rail- and road transport as 4G Packagings. The cartons carry the appropriate UN approval marking. Shipment of dangerous goods is subject to the following rules and regulations: IMDG-Code (Sea), IATA-DGR, ICAO-TI respectively (Air), RID (Rail) and ADR (road).
The cartons are approved for packing groups: I(X), II(Y), III(Z)
GBox Extra
- Outer packaging including absorbant pulp material
- Max. bottle diameter 80 mm
- Max. bottle height 185 mm
- Max. gross weight of combination packaging 10 kg
- Outer packaging including absorbant pulp cushioning
- Max. bottle diameter 100 mm
- Max. bottle height 235 mm
- Max. gross weight of combination packaging 2 kg
- Outer packaging including absorbant pulp material
- Max. bottle diameter 100 mm
- Max. bottle height 235 mm
- Max. gross weight of combination packaging: PG I: 14 kg, PG II: 19 kg
- Outer dimensions 400 x 300 x 305 mm
- Outer packaging including absorbant pulp cushioning
- Max. bottle diameter 135 mm
- Max. bottle height 295 mm
- Max. gross weight of combination packaging 7 kg
- Outer packaging including absorbant pulp material
- Max. bottle diameter 135 mm
- Max. bottle height 295 mm
- Max. gross weight of combination packaging 27 kg
- Inner volume 0.5 litre
- Tamper evident screw cap with PTFE seal
- Inner volume 1 litre
- Tamper evident screw cap with PTFE seal
- Inner volume 2.5 litre
- Tamper evident screw cap with PTFE seal
Dangerous Goods Packaging for disposal of waste aerosols
Used aerosol cans are classified as “waste aerosols” in the ADR regulations and are assigned to UN1950. We offer a fully compliant, all in one packaging solution that can directly be filled with the waste aerosols and just has to be closed with adhesive tape, and then it is ready for labelling and shipment.
GBox Extra
Technical details:
- UN approved fibreboard box that can be sealed to be liquid tight.
- Inner dividers for the protection of up to 28 used aerosol cans without protective cap
- Absorbent
- Max. can size 80 x 80 x 400 mm
Use of inner packagings:
You are using different inner packagings ? No problem. We perform the required test for you.
All sizes of our GBOX Standard product range also have a V-approval. This way those boxes can be used in an even more flexible way, without further testing.
Do you have any questions ? Please contact our dangerous goods experts,
call +49-(0)2234 – 40 70 0
Legal information:
The above listed cartons are approved for shipment of Dangerous Goods for sea-, air-, rail- and road traffic as far as 4G/4GV packaging (fibreboard box) is applicable. The cartons carry the appropriate UN approval number. Shipment of dangerous goods is subject to the following rules and regulations: IMDG-Code (Sea), IATA-DGR, ICAO-TI respectively (Air), RID (Rail) and ADR (road).
The cartons are approved for packing groups: I(X), II(Y), III(Z).
For using these packagings as 4G boxes please note:
The below listed cartons have been tested in combination with metal and/or plastic inner packaging. Using other than the originally tested combination, which usually is the case, BAM technical rules GGR-006 apply. In this case make sure that the inner packaging used in combination with the UN carton is as good as the one tested previously by the manufacturer. We recommend testing your packaging in our testing facilities at a minimal charge.
Regarding the use of all our dangerous goods packagings please always consult the relevant regulations for the used modes of transport.