Thermal Control Packaging

Thermal Control Packagings

We offer THERMO GBOX 650 packagings for temperature controlled shipments in four sizes for tranport periods of up to 96 hours:

  • They can be used as an outer packaging for P650 shipments, the drop test is documented by the UN approval of the box.
  • Outer packagings for „Patient Specimens“
  • Overpack for P/PI650 and P620/PI620 packagings
  • Suitable for dry ice
  • Including labels for all three classifications.


  • Thermal insulation packaging Technical Data:
    • Inner dimensions: 215 x 195 x 155 mm
    • Outer dimensions: 317 x 297 x 257 mm
    • Empty weight: 0.6 kg
  • Technical Data:

    • Inner dimensions: 205 x 205 x 240 mm
    • Outer dimensions: 297 x 297 x 336 mm
    • Empty weight: 0,74 kg
  • Technical Data:
    • Inner dimensions: 300 x 250 x 250 mm
    • Outer dimensions: 413 x 363 x 369 mm
    • Empty weight: 1,32 kg

  • Technical Data:
    • Inner dimensions: 500 x 300 x 340 mm
    • Outer dimensions: 614 x 414 x 457 mm
    • Empty weight: 2,5 kg

You are using different inner packagings ? No problem. We perform the required test for you.

All sizes of our GBOX Standard product range also have a V-approval. This way those boxes can be used in an even more flexible way, without further testing.

Do you have any questions ? Please contact our dangerous goods experts,

call +49-(0)2234 – 40 70 0

The above listed cartons are approved for shipment of Dangerous Goods for sea-, air-, rail- and road traffic as far as 4G/4GV packaging (fibreboard box) is applicable. The cartons carry the appropriate UN approval number. Shipment of dangerous goods is subject to the following rules and regulations: IMDG-Code (Sea), IATA-DGR, ICAO-TI respectively (Air), RID (Rail) and ADR (road).

The cartons are approved for packing groups: I(X), II(Y), III(Z).

For using these packagings as 4G boxes please note:
The below listed cartons have been tested in combination with metal and/or plastic inner packaging. Using other than the originally tested combination, which usually is the case, BAM technical rules GGR-006 apply. In this case make sure that the inner packaging used in combination with the UN carton is as good as the one tested previously by the manufacturer. We recommend testing your packaging in our testing facilities at a minimal charge.

Regarding the use of all our dangerous goods packagings please always consult the relevant regulations for the used modes of transport.